Printing
Lockout and Tagout (LOTO) Labels

This page provides step-by-step instructions for using the Brady Labelizer Plus to make labels providing lockout and tagout information. These instructions can also be used to make many other types of labels.

1. Insert 4" black-on-orange tape
   
   
2. Check the Label Options settings. They should be:
   
   

   Justification - Left Frame Label - Thin Reverse Print - Off Character Spacing - Normal Mirror - Off

   Text Position - Middle Frame Area - Off Text Direction - Line Spacing - Normal Baseline - Center

   
   
   The above are the correct settings. If your Brady Labelizer Plus does not have these settings selected, use the up/down arrows to select, then use the left/right arrows to change the setting. When done, push
   
   
3. Turn on the CAP LOCKS
   
   
4. TYPE OPTIONS, Expand/Condense to 60% (use left arrow to select),
   
   
5. TYPE SIZE, .3 , at the cursor
   
   
6. Type: RECLAIM PUMP #12-A
   
   
7. TYPE SIZE, .5 , at the cursor
   
   
8. Type: LOCKOUT PROCEDURE
   
   
9. TYPE SIZE. .15 , at the cursor
   
   
10. Type the next 7 lines
    
    
11. (to skip a line)
    
    
12. TYPE SIZE, .2 , at the cursor
    
    
13. Type: IN CASE OF EMERGENCIES CALL EXT. 888
    
    
14. PRINT PREVIEW
    
    

Using The Brady Labelizer Plus

MORE BRADY LABELIZER PLUS SUPPLY INFORMATION:
 Introduction (home) | Ordering Brady Labelizer Plus Supplies

Give us a call today at 1-800-788-5572 to learn more about DuraLabel sign and label printers.